OrigaLys ElectroChem SAS "Made in Know How"

Tu cesta : 0,00 EUR (EU only)

Productos
Aparatos
Información
Noticias
Inscripción
PP. FF.
Testimonios
Servicios
Contacto
Tel. : +33 9 54 17 56 03
Mail : contact@origalys.com
Dirección
OrigaLys ElectroChem SAS
Les Verchères 2, 1er étage
62A avenue de l'Europe
69140 Rillieux-la-Pape, France

Rotating Disk Electrode (RDE)

Choose the OrigaTrod that best suits your needs

Carry out reliable and accurate kinetic measurements! Benefit from a rotation speed ranging from 100 to 10,000 rpm.

When the OrigaTrod is used with the OrigaBox, it is supplied in a carrying case. This provides a ready‑to‑use kit that is easy to transport.

View the brochure

Discover our rotating disk electrode (RDE) models – 100 to 10,000 rpm

OrigaTrod 24 cm
Rotating Disk Electrode (RDE) - 100 to 10,000 rpm
With its speed controller: OrigaBox (CTV101 type)

OrigaTrod Kit - Électrode à disque tournant 24 cm & son contrôleur de vitesse

Detalles

OrigaTrod 21 cm
Rotating Disk Electrode (RDE) - EDI101 type - 100 to 10,000 rpm
With its speed controller: OrigaBox (CTV101 type)

OrigaTrod Kit - Électrode à disque tournant 21 cm (type EDI101) & son contrôleur de vitesse

Detalles

A complete solution with the OrigaTrod Kit!

This kit includes :

1 - A rotating disk electrode: OrigaTrod

2 - A speed controller: OrigaBox

3 - A USB flash drive containing the control software: OrigaBox Interface

4 - User manuals

5 - Appropriate cables

6 - A carrying case

Discover our OrigaTrod Lt rotating disk electrode (RDE) models – 100 to 5,000 rpm

OrigaTrod Lt with potentiometer
Rotating electrode – 10.5 cm

OrigaTrod Lt - Electrode Tournante avec Potentiomètre

Detalles

OrigaTrod Lt with analog setpoint & banana plug for mini‑potentiostat
Rotating electrode – 10.5 cm

OrigaTrod Lt - Electrode Tournante avec consigne analogique & fiche banane

Detalles

OrigaTrod Lt with analog setpoint
Rotating electrode – 10.5 cm

OrigaTrod Lt - Electrode Tournante avec consigne analogique

Detalles

Choose a complete solution with the OrigaTrod Kit!

Comprar

CThis kit includes :

1 - A rotating disk electrode: OrigaTrod (see models below)

2 - A speed controller: OrigaBox

3 - A USB flash drive containing the control software: OrigaBox Interface

4 - User manuals

5 - Appropriate cables

6 - A carrying case

Choose your tips (glassy carbon, platinum, gold, silver, copper, nickel, etc.)

Length of our tips: 20 mm

Diameter of our tips: 11 mm

Tip body : PEEK
(PTFE on request)

Specific requests
& on request: contact us!

OrigaTip
316L stainless steel tip Ø2 mm
Item code : AR02005CIAL

OrigaTip - Embout en acier inoxydable 316L ø2 pour OrigaTrod (et EDI)

Detalles

OrigaTip
316L stainless steel tip Ø5 mm
Item code : AR02006CIAL

OrigaTip - Embout en Acier Inoxydable 316L ø5mm pour OrigaTrod (et EDI)

Comprar

OrigaTip
Tip composed of 70% copper and 30% nickel Ø5 mm
Item code : AR02028CIAL

OrigaTip - Embout composé de 70% de Cuivre et 30% de Nickel ø5mm pour OrigaTrod (et EDI)

Detalles

OrigaTip
Aluminum tip Ø3 mm
Item code : AR02023CIAL

OrigaTip - Embout en aluminium ø3 pour OrigaTrod (et EDI)

Comprar

OrigaTip
Carbon steel tip XC38 / CK35 / C35 / 1.1181 Ø5 mm
Item code : AR02020CIAL

OrigaTip - Pointe en acier au carbone XC38/CK35/C35/1.1181 ø5 pour OrigaTrod (et EDI)

Detalles

OrigaTip
Nickel tip, 99.99% purity Ø5 mm
Item code : AR02032CIAL

OrigaTip
Platinum tip Ø2 mm
Item code : AR02018CIAL

Comprar

OrigaTip
Platinum tip Ø5 mm
Item code : AR02019CIAL

Comprar

OrigaTip
Platinum tip, 99.99% purity Ø5 mm
Item code : AR02036CIAL

OrigaTip
Silver tip Ø2 mm
Item code : AR01993CIAL

Comprar

OrigaTip
Silver tip Ø5 mm
Item code : AR02014CIAL

Comprar

OrigaTip
Titanium tip Ø2 mm
Item code : AR02038CIAL

OrigaTip
Titanium tip Ø5 mm
Item code : AR02015CIAL

Comprar

OrigaTip
Tungsten tip Ø1 mm
Item code : AR02039CIAL

Comprar

OrigaTip
Zinc tip Ø2 mm
Item code : AR02021CIAL

Comprar

OrigaTip
Zinc tip Ø5 mm
Item code : AR02022CIAL

Comprar

Discover our polishing kit for tips

Optimize your measurements! Perform reliable and accurate measurements by choosing our tip polishing kit.

Comprar

This kit includes :

1 - Steel polishing holder

2 - 5 P1200 polishing discs

3 - 5 P600 polishing discs

4 - 5 satin polishing discs

5 - 5 felt polishing discs

6 - 3 alumina suspensions: 1 × 2–3 µm + 1 × 1 µm + 1 × 0.3 µm

Sensitivity optimization

Surface uniformity

Reduction of interference

Reduction of edge effects

How to use your rotating electrode with a potentiostat?

Solution 1 : Manual control

Using the OrigaLys software, OrigaBox Interface, connected via USB. This solution can be used with OrigaLys potentiostats or those from any other brand.

Solution 2 : Automatic control

OrigaLys : The rotation speed is controlled by OrigaMaster, the PC software that drives the potentiostat.
Other brands : The rotation speed is controlled by the PC software that drives the potentiostat. An analog signal or RS232 is required; please contact us for details.

“I chose the OrigaTrod for its reliability, ease of use, and tip compatibility, in continuity with the electrodes I was already using for teaching and laboratory work. The ability to manufacture my own pellets using the sample-holder tip has significantly expanded the range of possible analyses, making the OrigaTrod a tool perfectly suited to my electrochemical applications.”
University of Concepción - CHILE
“We purchased the OrigaBox Trod to replace our former electrode, which was no longer commercially available. The installation of both the hardware and the control software was very straightforward. The electrode was easy to adapt to our setup and compatible with our existing tips. We were able to put it into operation as soon as it arrived, and our overall experience with this product has been very positive.”
KEMIWATT - France

UNIV CHILI

KEMIWATT

Crear tienda online con Oxatis

Rotating Disk Electrode (RDE)

Choose the OrigaTrod that best suits your needs

OrigaTrod 24 cmRotating Disk Electrode (RDE) - 100 to 10,000 rpmWith its speed controller: OrigaBox (CTV101 type)

OrigaTrod 21 cmRotating Disk Electrode (RDE) - EDI101 type - 100 to 10,000 rpmWith its speed controller: OrigaBox (CTV101 type)

A complete solution with the OrigaTrod Kit!

This kit includes :1 - A rotating disk electrode: OrigaTrod2 - A speed controller: OrigaBox3 - A USB flash drive containing the control software: OrigaBox Interface4 - User manuals5 - Appropriate cables6 - A carrying case

OrigaTrod Lt with potentiometerRotating electrode – 10.5 cm

OrigaTrod Lt with analog setpoint & banana plug for mini‑potentiostatRotating electrode – 10.5 cm

OrigaTrod Lt with analog setpointRotating electrode – 10.5 cm

Choose a complete solution with the OrigaTrod Kit!

CThis kit includes :1 - A rotating disk electrode: OrigaTrod (see models below)2 - A speed controller: OrigaBox3 - A USB flash drive containing the control software: OrigaBox Interface4 - User manuals5 - Appropriate cables6 - A carrying case

Length of our tips: 20 mm

Diameter of our tips: 11 mm

Tip body : PEEK(PTFE on request)

Specific requests& on request: contact us!

OrigaTip 316L stainless steel tip Ø2 mmItem code : AR02005CIAL

OrigaTip316L stainless steel tip Ø5 mmItem code : AR02006CIAL

OrigaTipTip composed of 70% copper and 30% nickel Ø5 mmItem code : AR02028CIAL

OrigaTipAluminum tip Ø3 mmItem code : AR02023CIAL

OrigaTipCarbon steel tip XC38 / CK35 / C35 / 1.1181 Ø5 mmItem code : AR02020CIAL

OrigaTipAluminum tip Ø5 mmItem code : AR02025CIAL

OrigaTipCopper tip Ø2 mmItem code : AR02029CIAL

OrigaTipCopper tip Ø5 mmItem code : AR02016CIAL

OrigaTipGlassy carbon tip Ø3 mmItem code : AR01998CIAL

OrigaTipGlassy carbon tip Ø5 mmItem code : AR01997CIAL

OrigaTipIron tip Ø5 mmItem code : AR02017CIAL

OrigaTipNickel tip Ø2 mmItem code : AR02030CIAL

OrigaTipNickel tip Ø5 mmItem code : AR02031CIAL

OrigaTipNickel tip, 99.99% purity Ø5 mmItem code : AR02032CIAL

OrigaTipPlatinum tip Ø2 mmItem code : AR02018CIAL

OrigaTipPlatinum tip Ø5 mmItem code : AR02019CIAL

OrigaTipPlatinum tip, 99.99% purity Ø5 mmItem code : AR02036CIAL

OrigaTipSilver tip Ø2 mmItem code : AR01993CIAL

OrigaTipSilver tip Ø5 mmItem code : AR02014CIAL

OrigaTipTitanium tip Ø2 mmItem code : AR02038CIAL

OrigaTip Titanium tip Ø5 mmItem code : AR02015CIAL

OrigaTipTungsten tip Ø1 mmItem code : AR02039CIAL

OrigaTipZinc tip Ø2 mmItem code : AR02021CIAL

OrigaTipZinc tip Ø5 mmItem code : AR02022CIAL

Optimize your measurements! Perform reliable and accurate measurements by choosing our tip polishing kit.

This kit includes :1 - Steel polishing holder2 - 5 P1200 polishing discs3 - 5 P600 polishing discs4 - 5 satin polishing discs5 - 5 felt polishing discs6 - 3 alumina suspensions: 1 × 2–3 µm + 1 × 1 µm + 1 × 0.3 µm

Sensitivity optimization

Surface uniformity

Reduction of interference

Reduction of edge effects

Solution 1 : Manual controlUsing the OrigaLys software, OrigaBox Interface, connected via USB. This solution can be used with OrigaLys potentiostats or those from any other brand.

OrigaTrod 24 cm
Rotating Disk Electrode (RDE) - 100 to 10,000 rpm
With its speed controller: OrigaBox (CTV101 type)

OrigaTrod 21 cm
Rotating Disk Electrode (RDE) - EDI101 type - 100 to 10,000 rpm
With its speed controller: OrigaBox (CTV101 type)

This kit includes :

1 - A rotating disk electrode: OrigaTrod

2 - A speed controller: OrigaBox

3 - A USB flash drive containing the control software: OrigaBox Interface

4 - User manuals

5 - Appropriate cables

6 - A carrying case

OrigaTrod Lt with potentiometer
Rotating electrode – 10.5 cm

OrigaTrod Lt with analog setpoint & banana plug for mini‑potentiostat
Rotating electrode – 10.5 cm

OrigaTrod Lt with analog setpoint
Rotating electrode – 10.5 cm

CThis kit includes :

1 - A rotating disk electrode: OrigaTrod (see models below)

2 - A speed controller: OrigaBox

3 - A USB flash drive containing the control software: OrigaBox Interface

4 - User manuals

5 - Appropriate cables

6 - A carrying case

Tip body : PEEK
(PTFE on request)

Specific requests
& on request: contact us!

OrigaTip
316L stainless steel tip Ø2 mm
Item code : AR02005CIAL

OrigaTip
316L stainless steel tip Ø5 mm
Item code : AR02006CIAL

OrigaTip
Tip composed of 70% copper and 30% nickel Ø5 mm
Item code : AR02028CIAL

OrigaTip
Aluminum tip Ø3 mm
Item code : AR02023CIAL

OrigaTip
Carbon steel tip XC38 / CK35 / C35 / 1.1181 Ø5 mm
Item code : AR02020CIAL

OrigaTip
Aluminum tip Ø5 mm
Item code : AR02025CIAL

OrigaTip
Copper tip Ø2 mm
Item code : AR02029CIAL

OrigaTip
Copper tip Ø5 mm
Item code : AR02016CIAL

OrigaTip
Glassy carbon tip Ø3 mm
Item code : AR01998CIAL

OrigaTip
Glassy carbon tip Ø5 mm
Item code : AR01997CIAL

OrigaTip
Iron tip Ø5 mm
Item code : AR02017CIAL

OrigaTip
Nickel tip Ø2 mm
Item code : AR02030CIAL

OrigaTip
Nickel tip Ø5 mm
Item code : AR02031CIAL

OrigaTip
Nickel tip, 99.99% purity Ø5 mm
Item code : AR02032CIAL

OrigaTip
Platinum tip Ø2 mm
Item code : AR02018CIAL

OrigaTip
Platinum tip Ø5 mm
Item code : AR02019CIAL

OrigaTip
Platinum tip, 99.99% purity Ø5 mm
Item code : AR02036CIAL

OrigaTip
Silver tip Ø2 mm
Item code : AR01993CIAL

OrigaTip
Silver tip Ø5 mm
Item code : AR02014CIAL

OrigaTip
Titanium tip Ø2 mm
Item code : AR02038CIAL

OrigaTip
Titanium tip Ø5 mm
Item code : AR02015CIAL

OrigaTip
Tungsten tip Ø1 mm
Item code : AR02039CIAL

OrigaTip
Zinc tip Ø2 mm
Item code : AR02021CIAL

OrigaTip
Zinc tip Ø5 mm
Item code : AR02022CIAL

This kit includes :

1 - Steel polishing holder

2 - 5 P1200 polishing discs

3 - 5 P600 polishing discs

4 - 5 satin polishing discs

5 - 5 felt polishing discs

6 - 3 alumina suspensions: 1 × 2–3 µm + 1 × 1 µm + 1 × 0.3 µm

Solution 1 : Manual control

Using the OrigaLys software, OrigaBox Interface, connected via USB. This solution can be used with OrigaLys potentiostats or those from any other brand.